Industry Insights & Guides
Safety Net Mesh Size Guide: Fine Debris vs 60/100 Fall Mesh
Fine debris mesh, 60 mm and 100 mm fall-arrest mesh, and scaffold-wrap GSM each do a different job. This guide explains how to match mesh size to the work.

Mesh size is the first thing to check on a safety net — before material, colour or price. The wrong mesh either lets debris through or cannot catch a falling person. This guide explains the three mesh sizes buyers meet most often: fine debris mesh, 60 mm and 100 mm fall-arrest mesh, and the GSM figures quoted for scaffold wrap.
Fall-arrest mesh: 60 mm and 100 mm
Personnel fall-arrest nets are made to catch people. Under EN 1263-1, the two mesh sizes are 60 mm (classes A1 and B1) and 100 mm (classes A2 and B2). The letter is the energy class — A nets are tested to 2.3 kJ, B nets to 4.4 kJ — and the number is the mesh size. In the United States, OSHA 29 CFR 1926.502 requires mesh openings of no more than 36 square inches (6 in x 6 in). The mesh must be small enough that a falling person cannot pass through it, and the net as a whole must absorb the energy of the fall. That is why mesh size, twine, border rope and test standard have to be checked together, never mesh size alone.
Fine debris mesh: stopping small objects
Debris nets do a different job: they stop things, not people. Tools, screws, concrete chips, offcuts and dust all need a much finer mesh than a person does — typically a few millimetres across. These nets are usually knitted from HDPE or PP. A debris net is not a substitute for a fall-arrest net: a fine mesh alone does not prove a net can catch a person. Where both risks exist, the usual answer is a combined system — a personnel fall-arrest net with a fine debris liner fitted inside it.
Scaffold wrap and GSM: what the number means
Scaffold wrap, debris netting and windscreen are sold by weight as well as by mesh size. GSM means grams per square metre — the weight of one square metre of the fabric. Light debris netting is often around 60-100 g/m2; heavier containment and windscreen fabrics run higher, around 140-200 g/m2 or more. A higher GSM is generally stronger and blocks more dust and wind, but it also catches more wind — wind load on a wrapped scaffold is a structural matter, and the scaffold and its ties must be designed for it. A higher GSM is not automatically better: match the fabric to the exposure, and confirm the wind-load calculation with the scaffold designer.
Choosing by job
Personnel fall arrest: an EN 1263-1 net, 60 mm or 100 mm mesh, class matched to the fall height and energy, with border rope and test reports checked.
Debris containment on a scaffold or building edge: a fine mesh debris net, sized to the smallest object that must be stopped.
Scaffold wrap and windscreen: mesh size plus GSM — higher GSM for dust and wind control, with wind load allowed for.
Both people and debris at risk: a personnel net plus a fine debris liner.
What to ask your supplier before you buy
Mesh size in millimetres, measured across the opening — not a trade name.
Knotted or knotless construction, and twine diameter.
For fall-arrest nets: EN 1263-1 class and system, or OSHA compliance, with test reports.
For scaffold wrap: GSM, mesh size, and whether the fabric is UV-stabilised.
Border-rope specification and the sizes available — and whether the net can be made to your dimensions.
Mesh size is a safety decision, not a detail. If the mesh, the standard and the job do not match, ask the supplier to confirm in writing before the net goes up.
