Industry Insights & Guides
EN 1263-1 Label Guide: Classes A1/A2/B1/B2 & Systems S/T/U/V
Read an EN 1263-1 safety net label: classes A1, A2, B1, B2 and systems S, T, U, V explained in plain language — match the class and system to the job.

EN 1263-1 is the European standard for safety nets used as temporary work equipment in construction and assembly work. Its label is not decoration: it tells you, in a few short codes, what the net was tested for and how it is meant to be installed. If you can read those codes, you can compare offers on equal terms and avoid buying a net for the wrong job.
What is on the label
A label made to EN 1263-1 normally shows the manufacturer's name, the year and month of manufacture, the net class, the system letter, the mesh size, the net size, the material, the test-mesh identification and a code that links the net to its test records. It also carries the warning "Do not use without test mesh." If any of this information is missing or unreadable, ask the supplier for it before you order. A label on its own does not replace correct installation, inspection and maintenance.
Classes: A1, A2, B1 and B2
The class combines two things: the maximum mesh size and the energy level used in the drop test. A1: mesh up to 60 mm, tested at 2.3 kJ. A2: mesh up to 100 mm, tested at 2.3 kJ. B1: mesh up to 60 mm, tested at 4.4 kJ. B2: mesh up to 100 mm, tested at 4.4 kJ. Read the code from left to right. The letter is the energy level: class B nets are tested at the higher energy level (4.4 kJ) than class A nets (2.3 kJ). The number is the mesh size: 1 means a maximum mesh size of 60 mm, and 2 means a maximum mesh size of 100 mm. So B1 is the combination of the higher test energy and the smaller mesh, while A2 is the lower test energy with the larger mesh. In practice, a smaller mesh has smaller openings, which helps stop smaller falling objects.
Systems: S, T, U and V
The system letter describes how the net is attached and whether it is used horizontally or vertically. System S: a net with a border rope, for horizontal use. System T: a net attached to brackets, for horizontal use. System U: a net attached to a supporting structure, for vertical use. System V: a net with rope lacing on a gallows-type support, for vertical use. In short, S and T are horizontal systems and U and V are vertical systems. The system matters as much as the class: a net that is correct on paper will not protect anyone if it is fixed in a way it was not designed for.
How to choose in three steps
- Match the system to the job. Is the net catching a fall from above (horizontal) or stopping a fall sideways or through an opening (vertical)? Pick S or T for horizontal use and U or V for vertical use, and confirm the fixing method suits the site.
- Match the class to the risk. Consider the possible fall height and energy, and what has to be caught. A class B net is tested at a higher energy level than a class A net, and a class 1 net has the smaller maximum mesh size. If you are unsure, ask for the supplier's guidance for your fall height and application rather than guessing.
- Check the whole label, not just the code. Confirm the manufacturer, the date of manufacture, the mesh and net size, the material and the test-mesh identification, and keep the test mesh with the net. Installation and positioning are covered by EN 1263-2, so follow its rules for the chosen system and have the installation checked by a competent person.
Read the label before you buy, match the class and the system to the job, and keep the label and test mesh with the net for its working life.
